![]() NOTE: Connect the cameras and cables to the DVR before mounting to ensure that they work properly. Plug both, camera and DVR, power adapter into a wall socket or a surge Connect the DVR power adapter into the 12V port on the back of the DVR. Connect the power adapter to the female side of the four-way camera Connect the red RCA power adapter on the 60ft. The channel inputs are labeled by number.ĭ. BNC cable to channel input on the back of the DVR. Connect the yellow BNC adapter on the 60ft. ![]() Connect the red RCA power adapter on the cable to the red RCA power adapter on the camera. BNC cable to the yellow BNC adapter on the camera. BNC cable, four-way camera splitter, power adapters, the ![]() Connect the USB end of the mouse into the USB port on the DVR.Ī. Connect the RCA end of the cable into the RCA input on your TV/monitor.ī. Connect the BNC end of the cable into one of the Video Output ports on theĬ. Locate the BNC to RCA Video Output Cable.ī. Turn your TV/monitor on and select the correct input on the TV/monitor.Ī. Connect the other end of the cable into the VGA input on your TV/monitor.ĭ. Connect one end of the VGA cable into the VGA port on the DVR.Ĭ. Locate the VGA Video Cable (not included).ī. STEP 1: Connecting a TV/Monitor with a BNC to RCA CableĪ. STEP 4: Connecting the Cameras to the DVR STEP 2: Connecting a TV/Monitor with a VGA Cable Router/Modem with two empty ports (not included)Ĭomputer running Windows Vista, XP, 7, or 8 BNC cables, 4-way splitter and power adapter (Kits Only) It took me a lot of digging and trying out different suggestions to get the rtsp url, so that’s why I’m posting it here, in case someone has the same model.TV with a RCA input or Monitor with a VGA or RCA input (not included)īNC to RCA Cable (included) or VGA cable (not included)Ĭameras with the 60ft. On my windows laptop, I don’t get the tiled view as shows up on the DVR monitor, but I just open a new window, start another instance of VLC media player with a different channel in the url and get the same effect. To see the other cameras, just substitute channel=2, channel=3, etc. ![]() I hit the Play button and the VLC media player displays the screen from the first IP camera. Where User is my username, Passw is my password and XXX.XX.XXX is the static IP assigned to the DVR. Rtsp://User: :554/cam/realmonitor?channel=1&subtype=0 Then on a windows laptop I open up the VLC media player, go to Media → Open Network Stream and in the box provided I type this url: ![]() I assigned the DVR a static IP in my router, and forwarded port 554 to that IP. Night Owl 16 Channel 4 Camera Wired Security Camera System trend cctvcamerasupport. I didn’t want to do that, so I setup the DVR according to instructions (OFFLINE) with basic username and password and connected it by ethernet to my router. I recently bought a NightOwl wired dvr security system DVR-BTD2-81-VT3 with wired cameras CM-DP2LSA-8 not realizing that an online account is required to do any remote viewing. To get the list of channels on your device by running and update the yaml accordingly. Ports 80, 8000, and 30396 are open, but none appear to accept that protocol. Unfortunately even though the ISAPI results indicate it can use RTSP streaming for the video channels, my device does not appear to have an open RTSP port to connect to and cannot find a way to enable it. The ISAPI URLs documented in work on this device. The device I have (and likely other Night Owl devices) is using Hikvision firmware with Night Owl branding. I am using a Night Owl TH82-44P1-2 DVR and had some luck getting it to work, but only for motion notifications and still pictures, not video. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |